CastCHECK

CastCHECK Introduction >> Basics >> Modeling the Geometry

Modeling the Geometry

What Do I Need to Use CastCHECK?
CastCHECK reads STL-files. STL- (SLA) files can be created by almost all 3D CAD-programs. The geometry to be analyzed can thus be created by any 3D CAD-program. CastCHECK does not set any constraints to the position or to the location of the geometry, i.e. you just model it and write an STL-file of it. You can use any typical units, e.g. millimeters, inches, etc.

CastCHECK Introduction >> Basics >> Modeling the Geometry

Updated 30.10.98

webmaster@castech.fi

What Do I Need to Use CastCHECK?

CastCHECK reads STL-files. STL- (SLA) files can be created by almost all 3D CAD-programs. The geometry to be analyzed can thus be created by any 3D CAD-program. CastCHECK does not set any constraints to the position or to the location of the geometry, i.e. you just model it and write an STL-file of it. You can use any typical units, e.g. millimeters, inches, etc.